ART
RENOIR
Water jet CNC machine
FRAME
Made
from a combination of tubing and fabricated
plates.
TABLE:
Made
from heavy-duty tubing .The table is equipped with
1mm thick grid system which support up to 900 LBS
of work piece. Optional support for heavier work
piece is available.
LOCATING
PINS (OPTIONAL):
Combination
of 3 sides and 2 fronts, heavy duty locating pins
controlled through program for squaring the piece
on the table.
AXES
DESCRIPTION
AXIS
1: X AXIS, moves back and forth along the length
of the machine
AXIS
2: Y AXIS, moves back and forth along the width of
the machine
AXIS
3: Z AXIS, moves up and down along the height of
the machine
AXIS
4: Abrasive control, is to adjust the volume of
the abrasive feed.
GENERAL
DESCRIPTION OF THE MACHINE
A
double sided supported gantry type CNC with the
following specifications:
Available
work area sizes:
4’x4’
4’x8’
5’x10’
5’x12’
Traverse
speed: (Maximum point-point positioning speed.
X=40
m/min
Y=40
m/min
Z=20
m/min
AXIS
1 (X) DESCRIPTION, (INCLUDED)
X
is a linear axis along the length of the machine
moving to back and forth of the work area. This
axis is directly connected to a high precision
planetary gearbox hence adding higher accuracy and
reliability.
X-Axis
is mounted on four sets of four rows size (30)
linear bearings and rail system.
Power
and transmission on the X-Axis is provided by a
powerful 1KW digital, brush less AC servo motor
and drive system with extremely accurate 17 bit
encoder feed back (131000 pulses/Revolution).
X-Axis
is coupled to ground high precision rack and
pinion for ultimate accuracy and reliability.
AXIS
2 (Y) DESCRIPTION, (INCLUDED)
Y
is a linear axis along the width of the machine
moving to left and the right of the work area.
This axis is directly connected to a high
precision planetary gearbox hence adding higher
accuracy and reliability.
Y-Axis
is mounted on four sets of four rows size (30)
linear bearings and rail system.
Power
and transmission on the Y-Axis is provided by a
powerful 1.5KW digital, brush less AC servo motor
and drive system, with extremely accurate 17 bit
encoder feed back (131000 pulses/Revolution).
Y-Axis
is coupled to high precision ground rack and
pinion for ultimate accuracy and reliability.
AXIS
3 (Z) DESCRIPTION, (INCLUDED)
Z
is a vertical axis along the height of the machine
up and down of the work area. This axis is
directly connected to a high precision preloaded
ball screw and ball nut eliminating pulley and
belt system hence adding higher accuracy and
reliability.
Z-Axis
is mounted on four sets of size (25) four rows
linear bearing and rail system.
Power
and transmission on the Z-Axis is provided by a
powerful 900W digital, brush less AC servo motor
and drive system, with extremely accurate 17 bit
encoder feed back (131000 pulses/Revolution).
Z-Axis
is coupled to a high precision ball screw and ball
nut for ultimate accuracy and reliability.
AXIS
4 (ABRASIVE CONTROL), (INCLUDED)
Abrasive
control
axis is a virtual axis, commanding proper volume
of abrasive to the cutting head.
ELECTRICAL
CABINET, (INCLUDED)
All
of our electrical components are CSA and CUL
approved. The electrical systems on our machines
are designed to work in extreme conditions and all
components are locally available for simple
maintenance and lower overall cost of ownership.
Our
electrical enclosure is a true Nema 12 dust
proofed cabinet with standard flip over keyboard
and mouse platform.
We
use high flex shielded cables for all connections.
The cables are carried by all enclosed cable
tracks to protect them from chips and external
elements.
The
whole electrical system is approved by Ontario
hydro and carries approval sticker.
CONTROL
SYSTEM, (INCLUDED)
Powerful, PC based CNC controller with
Windows© XP operating system and 3 interpolated,
2 linear positioning axes.
DXF converter generating machine codes
automatically.
G_code import capability.
Controller is running separately on a real
time operating system while allowing the operator
to work in a familiar Windows© environment.
User friendly interface allowing the
operator to navigate through menus and options
allowing them to edit or create programs right on
the machine terminal eliminating the need for
additional person for programming.
MDI menu for manual operations.
Standard remote diagnostic allowing us to
troubleshoot the machine from a remote location
saving traveling time.
Automatic spindle warm-up cycle.
Optional macro program to allow for
specific operations to be predefined and called up
with the push of a button rather than being
written each time in programming process. (Not
included)
Optional CAD/CAM program. (Not included)
HANDHELD
PENDANT (INCLUDED)
The
handheld pendant is equipped with the following
functions:
Jog
function on X, Y and Z axis enables the operator
to jog the machine in forward and reverse mode.
Start
and stop cycle buttons enables the operator to
start or stop a program while he or she is closer
to actual work piece.
Pause
mode stops all motions and resume button continues
existing motions enabling the operator to inspect
validity of operation or a new program.
Federate
override controls the overall speed of the machine
from 0 to maximum traverse speed on all axes.
The
pendant also supports incremental jogging for fine
tuning adjustment for all axes.
SAFETY
BARRIER (OPTIONAL)
Safety
barrier installed at the front of the machine
activated when crossed and pauses all existing
motions and resets by resume button. This option
is an excellent safety feature to protect the
operator from accidental contact with moving axes.
OTHER
SPECIFICATIONS
Power
requirements for Canada : 600V 3 phases at 45
Amps.
Power
requirements for U.S.A. : 460V 3 phases at 55
Amps.
Power
requirements for Europe and Asia: 380V 3 phases at
70 Amps.
Air
requirements: 7 bars or 100 PSI.
|
